1. PVC Lay Flat Hose connection. When the PVC Lay Flat Hose interface is fitted, a soft protective layer must be padded and then tightened with galvanized wire or throat hoop.
2. Use of PVC Lay Flat Hose. When using PVC Lay Flat Hose, the high-pressure resistant PVC Lay Flat Hose should be connected near the pump. After filling, the PVC Lay Flat Hose should prevent torsion or sudden bending, and the collision damage of the PVC Lay Flat Hose interface should be prevented.
3. Lay Flat Hose of PVC. When laying PVC Lay Flat Hose, it is necessary to avoid sharp objects and various oils. When laying PVC Lay Flat Hose vertically to high places, it is necessary to use PVC Lay Flat Hose hook. When laying PVC Lay Flat Hose through the main road, it should be padded with PVC Lay Flat Hose guard bridge. When passing through the railway, PVC Lay Flat Hose should pass under the track to avoid the intermittent water supply of PVC Lay Flat Hose caused by wheel rubbing.
4. Prevent icing. In severe winter, when water supply needs to be suspended in the fire site, in order to prevent the freezing of PVC Lay Flat Hose, the pump needs to run slowly and maintain a small water output.
5, PVC Lay Flat Hose cleaning, PVC Lay Flat Hose after use, to be cleaned, for the transport of foam PVC Lay Flat Flat, we must carefully wash, protect the glue layer. In order to remove grease from PVC Lay Flat Hose, it can be washed with warm water or soap. For frozen PVC Lay Flat Hose, melt it first, then clean and dry the PVC Lay Flat Hose without drying. It should not be rolled up and stored.